Recarburizer Carbon|Graphite Powder|Carbon Raiser|Carbon Additive|Foundry Coke|Petro Coke|Calcined Petroleum Coke|GPC Graphite Petro Coke
Description

Requirements for carbon additives in converter steelmaking
In converter smelting of medium and high carbon steel grades, petroleum coke with very little impurities is used as a carbon additive. The requirements for carbon additives for top-blown converter steelmaking are that the fixed carbon should be high, the ash, volatile matter and sulfur, phosphorus, nitrogen and other impurity contents should be low, and it should be dry, clean and with moderate particle size. Its fixed carbon ωC≥96％, volatile matter≤1.0％, ωS≤0.5％, moisture≤0.5％, and the particle size is 1～5mm; if the particle size is too fine, it is easy to be burned off; if too coarse, it floats on the surface of the molten steel and is not easy to be absorbed by the molten steel.

Specifications

Packing & Delivery

Packing: 1 ton big bag, 20-25mt in 20' container


Our Services

We can try our best to provide you the good services as below:

1.We have Experienced staffs .

2.Provide kinds of certificates.

3.24 hours on line to answer all your questions .

4.The content packing particle size may be based on customer demand.

5.Quality can be guaranteed. we provide safe products to our users.

ZhenAn is an enterprise specializing in Metallurgical & Refractory products , integrating production, processing, sales and importing and exporting business.
We are focused on building a dedicated team of professionals across the globe. At ZhenAn, we are committed to provide complete solutions by delivering the “right quality & quantity” to suite our customer’s processes.

Annual production and sales more than 150,000 tons. Our factory covering an area of 30,000 square meters, it has a complete set of modern production equipment, two large production bases including hydro-metallurgy, two key laboratories and a metallurgical materials testing center with dozens of senior researchers.